1.Product name: 1 fiber port 8 copper port PoE din-rail unmanaged industrial switch

2.Product model: X6118P

3.Product specification

Technology standard：IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.3af、IEEE802.3at

Product ports：

            GE fiber port：1* 1000Base-X SFP fiber

            FE copper port: 8*10/100Base-T(1 group 2*4 RJ45)

            PoE power supply PIN:1/2(+),3/6(-),single port output power up to 30W

            PoE Port priority: the bigger of the number of port,the higher of the priority

Transmission distance：twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)

                                     100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)

                                     Fiber port transmission distance is determined by the SFP optical module model, such as: multimode fiber: 1310nm, 2km; Single-mode fiber: 1310nm, 20/40/60km; 1550nm, 20/40/60/80/100/120km

Function selection of dial switch(customized):

Switch can select the following working method online:

① Standard mode,② cross-device QinQ isolation mode, ③ VLAN isolation mode based on downlink port,④ copper port forced 10M mode, ⑤ cross-device QinQ isolation+copper port forced 10M mode, ⑥ VLAN isolation based on downlink port+copper port forced 10M mode, ⑦ fiber port is high priority+copper port is low priority mode.

Note: Customers can also customize other working modes of the switch according to actual needs.

Switching properties：

                 Cache: 1.0Mbit

LED Indicators:

                Power indicatior: PWR1,PWR2(Green light)

                ① GE fiber: 1000M(Green light is on)

                ② FE copper: Link/Act(Yellow light is on),Link-down(Yellow light is off),Link-up(Yellow light is on and flash),sending and receiving data

                ③ PoE ports(1~8 port),PD connection power supply normal(Green light is on)

                PoE power supply abnormal(Green light is off) If the external PD is connected

Power supply:

               Access terminal: 6-pin 5.08mm spacing terminal 
               Input voltage: DC48(46~57)V
               Standby power consumption:＜5W;System full-load power consumption:＜120W
               Power supply supports dual power supply redundancy
               Power supply supports non-polarity

Working environment:

               Working humidity:10%～90%（no condensation）

               Aluminum switch box: protection grade: IP40

Installation method: DIN-rail or wall-mounted