1.Product name: 10 gigabit copper port DIN-rail unmanaged industrial switch
2.Product model: X61010
3.Product specification
Technology standard:IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x
Product ports:
GE copper port:10* 10/100Base-T/1000Base-TX(1 group 2*4 10/100/1000M, RJ45,1 group 1*1 10/1000/1000M,RJ45) ,self-adaptive RJ45 port,full duplex/half duplex self-adpative working mode,support MDI/MDI-X self-adaptive
Power supply: DC dual power supply interface(6-pin 5.08mm spacing terminal)
Transmission distance:twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)
100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
Function selection of dial switch(customized):
Switch can select the following working method online:
① Standard mode,② cross-device QinQ isolation mode, ③ VLAN isolation mode based on downlink port,④ copper port forced 10M mode, ⑤ cross-device QinQ isolation+copper port forced 10M mode, ⑥ VLAN isolation based on downlink port+copper port forced 10M mode.
Note: Customers can also customize other working modes of the switch according to actual needs.
Switching properties:
Cache: 1.5Mbit
LED Indicators:
Power indicatior: PWR(Green light)
GE copper port: Link/Act(Yellow light "ON"),Link-down(Yellow light"Off")
Link-up: Yellow light is on and flash,sending and receiving data
Green light "ON" is 1000M,Green light"OFF" is 10M or 100M
Industry standard:
Power supply:
Access terminal: 6-pin 5.08mm spacing terminal
Input voltage: DC 12~48V
Standby power consumption:<1W;System full-load power consumption:<65W
Power supply supports dual power supply redundancy
Power supply supports non-polarity
Working environment:
Installation method: DIN-rail or wall-mounted