1.Product name: 2GE Fiber 8GE Copper Port PoE Commercial Dumb Switch
2.Product model: X3128P
3.Product specification
Technology standard:IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.3af、IEEE802.3at、IEEE802.1q (VLAN Tagging)、IEEE802.1p(QoS)
Function selection of 3-digit dial switch:
Gigabit switch can select the following working method online:
① standard mode,② cross-device QinQ isolation mode,③ Uplink port link aggregation mode,④ VLAN isolation mode based on downlink port,⑤ copper forced 10M mode,⑥ cross-device QinQ isolation+copper forced 10M mode, ⑦ downlink based port VLAN isolation+copper forced 10M mode, ⑧ fiber port is high priority+copper port is low priority mode.
Note: Customers can also customize other working modes of the switch according to actual needs.
Product ports:
Gigabit fiber port: 2*1000Base-X SFP fiber,
Gigabit copper port:8* 10/100Base-T/1000Base-TX(2 group 1*4 10/1000/1000M RJ45)
Power supply: DC power supply interface(∮2.1mm)
PoE power supply PIN: 1/2(+),3/6(-),port maximum/average power: 30W/15.4W
DIP switch interface: select the different working mode of switch network communication online
Transmission distance:twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)
100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
Multi-mode: 1310nm,2km
Single-mode: 1310nm,20/40/60km,1550nm,20/40/60/80/100/120km
Switching properties:
Cache: 2.0Mbit
LED Indicators:
Power indicatior: PWR(Green light)
Gigabit fiber:1000M(Green light is on)
Gigabit copper: Link/Act(Yellow light is on),link-down(Yellow light is off)
Link-up(Yellow light is on and flash,sending and receiving data)
PoE port(1-8 ports):powered normally when green light is on. PoE power supply is abnormal when green light is off.
Power supply:
Power adapter: DC ∮2.1mm,output cable:1.2m
Input voltage: AC100~240V/50-60Hz
Output voltage: DC52V/2.5A 130W
Standby power consumption:<1W;System full-load power consumption:<130W
Working environment:
Installation method: Desk-mounted