Welcome to Shenzhen Xallcom Technology Co.,Ltd.
3-series:Unmanaged Commercial Switch

Home  -  Products  -  3-series:Unmanaged Commercial Switch  -  

X3118P:1GE Fiber+8GE Copper unmanaged commercial switch
X3118P:1GE Fiber+8GE Copper unmanaged commercial switch

1.Product name: 1GE Fiber+8GE Copper unmanaged commercial switch

2.Product model: X3118P

3.Product specification

Technology standardIEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.3af、IEEE802.3at、IEEE802.1q (VLAN Tagging)、IEEE802.1p(QoS)

dip switch:

function:Three digit dialing code

     Eight built-in working modes gigabit switches:
① Standard mode, ② Cross device QinQ isolation mode, ③ Uplink port link aggregation mode
④ Based on downstream port VLAN isolation mode, ⑤ forced 10M mode for electrical ports, ⑥ cross device QinQ Isolation+forced 10M mode for electrical ports, ⑦ VLAN isolation based on downstream ports+forced 10M mode for electrical portsMode: ⑧ The optical port is in high priority mode and the electrical port is in low priority mode.
Note: Customers can also customize other working modes of the switch according to their actual needs.

Product ports:

        Gigabit Fiber port:  1*1000Base-X SFP

        Gigabit copper port:8* 10/100Base-T/1000Base-TX(2 group 1*4 10/1000/1000M RJ45),self-adaptive RJ45 port.

          Power supply: DC supply interface(DC head 2.1mm)

          POE power supply pins: 1/2 (+), 3/6 (-), port maximum/average power: 30W/15.4W
          DIP interface: online selection of different working modes for switch network communication

Transmission distancetwisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)

                                  100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)

Multimode fiber:    1310nm, 2 kilometers
Single mode fiber: 1310nm, 20/40/60 kilometers
                           1550nm, 20/40/60/80/100/120 kilometers

Switching properties

                 Gigabit switch backplane band width: 18G(no block)
                 Transmission method: store and forward(full wire speed)
                 Packet forwarding rate:14.8Mpps
                 Jumbo frames: support 9216Bytes
                 MAC:8K

                 Cache: 2.0Mbit

LED Indicators:

                Power indicatior: PWR(Green light)

                Gigabit copper: Link/Act(Yellow light is on) link-down(Yellow light is off)

                Link-up(Yellow light is on and flash,sending and receiving data)
                Green light on is 1000M speed rate, yellow light on is 10M or 100M speed rate


Power supply:

               Power adapter (DC head 2.1mm output line length 1.2M)
               Input: AC100~240v 50~60HZ
               Output: DC52V/2.5A 130W
               Standby power consumption:<1W; System full load power consumption:<130W

Working environment:

               Working temperature:-20~70℃
               Storage temperature:-40~85℃
               Working humidity:5%~95%(no condensation)
               Net/gross weight:0.2Kg

               Installation method: desktop

Product size: 191.6x96.86x30(mm)
Previous:X31264-F:unmanaged commercial switch
Next:X31216P:16 Gigabit RJ45 copper ports + 2 Gigabit fiber portsE Commercial PoE Switch
Copyright 2024 Shenzhen Xallcom Technology Co., Ltd. All Rights Reserved.
Add: 3/F, No.220-1 of Niucheng Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China
Tel: +86-755-8605 9338  Fax: +86-755-8605 9328
E-mail: info@xallcom.com
Design By:www.66168.net