Welcome to Shenzhen Xallcom Technology Co.,Ltd.
4-series:Communication Module

Home  -  Products  -  4-series:Communication Module  -  

X4S04:4-port Channel FXS module
X4S04:4-port Channel FXS module

1.Product description

         The 4-port FXS module is internally integrated with functional modules such DSP(Digital Single Processor) ,codec, SLIC(Subscriber Line interface circult),Interface protection,DC/DC conventer,providing all port functions required by 4-port FXS interface.FXS module adopts 3.3V and 12V mixed power supply method,3.3V is the internal working voltage,the 12V power supply is converted into VBAT to power supply by internal DC/DC converter for SLIC and external feeding and ring.FXS module can confirgure and control parameters such as cording mode,interface impedacne,feeding,ringing,DTMF,etc. by SPI interface,FXS module communicates with external data through PCM/GCI data interface,and the clock frequency and time slot allocation of the interface are flexibly configured.

2.Main function

        * single module integrates 4-ports FXS interface circuits

       * the seven functions of BORSCHT required by the subscriber line interface circuit,feeding, overvoltage protection, ringing, monitoring, encoding and decoding, mixing and testing functions

       * built-in DC/DC converter,the module completes the conversion of VBAT power required for feeding and ringing.

       * support DTMF production and detection functions

       * support Caller ID production and on-hook transmission
       * support the production of signal tone(dial tone,busy tone,ring back tone,etc.)

       * support A-law PCM coding,u-law PCM coding and 16-bit linear coding and decoding

       * parameters are programmable such as interface impedance, feed (feed current), ringing (frequency, amplitude, waveform) and coding (coding format, gain, time slot).

       * intelligent dynamic power adjustment, low heat generation

3.Product specification

3.1 Power supply

No.

Parameter

Minimum

Typical

Maximum

Unit

Remark

1

Working voltageVCC

3.15

3.3

3.45

V


2

Auxiliary voltageVDC

10.8

12

13.2

V

 

3

Working power supply current IVCC

-

160

-

mA

All interfaces are in the hang state

4

-

200

-

mA

4-channel off-hook, feed current 20 mA, ring impedance 1500 Ω

5

-

180

-

mA

4-channel ringing, 60VAC, 25HZ sine wave ringing current, ringing impedance 1REN

6

Auxiliary power supply current IVDC

-

60

-

mA

All interfaces are in the hang state

7

-

540

-

mA

4-channel off-hook, feed current 20 mA, ring impedance 1500 Ω

8

-

240

-

mA

4-channel ringing, 60VAC, 25HZ sine wave ringing current, ringing impedance 1REN


3.2 FXS interface

No.

Parameter

Minimum

Typical

Maximum

Unit

Remark

1 

feed voltage VTR

-

-48

-

V

 

2 

feed current ILOOP

10

20

40

mA

Configurable by SPI interface

3 

Maximum ring resistance RLOOP

-

-

2000

Ω

 

4 

Ringing voltage Vring

-

75

110

VPK

Configurable by SPI interface

5 

Ring frequency

-

25

-

Hz

Configurable by SPI interface

6 

Interface impedance

-

600

-

Ω

 

7 

Transmit gainA/D

-

0

-

dB

Configurable by SPI interface

8 

Receive gainD/A

-

-7

--

dB

Configurable by SPI interface

9 

Frequency characteristic

-0.5

-

+0.5

dB

Frequency range 3003000Hz

-1.4

-

+0.5

dB

Frequency range 30003400Hz

10 

Level characteristic

-0.25

-

0.25

dB

Input level 3dB-37dB,reference level-10dBm

-0.5

-

0.5

dB

Input level-37dB-50dB,reference level-10dBm

-1

-

1

dB

Input level-50dB-60dB,reference level-10dBm

11 

Return loss

26

30

-

dB

frequency range 3003400Hz

12 

Quantization distortion

25

-

-

dB

Input level-45-40 dBm0

30

-

-

dB

input level-40-30 dBm0

35.5

-

-

dB

input level-303.14 dBm0

13 

Idle noise

-

-

-75

dBmP

 


3.3 PCM interface

        * Total line rate: 512Kbps~8.192Mbps

       * Frame rate: 8Khz

       * Slot width and position: configurable

3.4 SPI interface

        * Total line rate: up to 16Mbps

       * Operation method: support 8bit and 16bit

3.5 Reset signal

        * Function: external reset control for the module, low level is effective, and pulse width is required to be ≥ 1ms
       * Type: input, 10K Ω pull-up resistance inside the module
       * Code type: NRZ code
       * Signal level: TTL/CMOS (3.3V)

3.6 Working environment

       * working temperature: -40~85

      * storage temperature: -50~85

3.7 Product size: 56x36x12.16mm

4.Product application

X4S04 can be applied to the following devices:
      * SPC  switch
     * VOIP gateway and Routing device

     * Voice gateway

     * Voice dispatching device
     * xDSL Integrated Access Devices (IADs)
     * Optical communication network terminal/unit

     * Wireless fixed terminal (WFT)

Previous:X4O04:4-port Channel FXO module
Next:
Copyright 2024 Shenzhen Xallcom Technology Co., Ltd. All Rights Reserved.
Add: 3/F, No.220-1 of Niucheng Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China
Tel: +86-755-8605 9338  Fax: +86-755-8605 9328
E-mail: info@xallcom.com
Design By:www.66168.net