Welcome to Shenzhen Xallcom Technology Co., Ltd.
Q-series:Automotive Ethertnet Product (IoV)

Home  -  Products  -  Q-series:Automotive Ethertnet Product (IoV)  -  

XQ92111:L4 autonomous driving vehicle Ethernet switch
XQ92111:L4 autonomous driving vehicle Ethernet switch

1、Product Overview

XQ92111 is a 2+3+6 port Gigabit Automotive Ethernet (100/1000BASE-T1) switch that supports gPTP(802.1AS-2020,802.1AS-2021) time-sensitive network. It has 2*RJ45 Gigabit Ethernet ports(100BASE-Tx/1000BASE-T), 1*10G SFP+ fiber port, 3*100Mbps Automotive Ethernet ports (100BASE-T1), 6*Gigabit Automotive Ethernet ports (100/1000BASE-T1), 2 CANFD(optional), 1 DI input, and 1 DO output.

The device supports mirror monitoring mode, VLAN, port isolation, gPTP(802.1AS-2020,802.1AS-2021), etc.; it has a rich set of indicators, and the working status of the device is clear at a glance. This device is the most universal Automotive Ethernet tool, which can be used as a dynamic monitoring tool, media converter, and Automotive Ethernet switch.

Key applications include: benchtop testing, ECU and system-level automated testing, in-Automotive Ethernet monitoring, parallel writing of up to 9*ECUs, Ethernet-to-CAN FD gateway testing, LiDAR/millimeter-wave radar/camera/ADAS testing, and gPTP clock synchronization system setup.

2、Product Features

  Ø Designed for DC9~36V wide voltage supply, compatible with 12V/24V on board power systems.

 Ø The system features 6 Gigabit Ethernet interfaces for Automotive networking, supporting 100/1000BASE-T1 standards. Available interface types include H-MTD, TEMatenet, ECT (electrical connection port), Amphenol connector, and optional 3.81OPEN terminals.

 Ø Three 100Mbps Automotive Ethernet ports (100BASE-T1 standard) with optional connection types: H-MTD, TEMatenet, or 3.81 OPEN terminals.

 Ø Two Gigabit standard Ethernet ports (100BASE-Tx/1000BASE-T) with RJ45 or M12 aviation socket interface options.

 Ø One 10G SFP+ port.

 Ø One 100Mbps network port for configuring device parameters via web interface and facilitating data exchange between Ethernet and CAN FD.

 Ø Two CAN FD channels support protocol conversion between Ethernet and CAN FD. (Optional; contact customer service for details)

 Ø 1 channel of RS485 interface.

 Ø 1 channel of DI/DO.

 Ø Supports gPTP clock synchronization and 802.1AS-2020, 802.1AS-2021

 Ø Supports IGMP/MLD Snooping

 Ø The system supports mirror monitoring mode, where the standard Ethernet port CH11 captures and transmits all packet data from ports CH1 to CH10.

 Ø Supports VLAN functionality. You can configure VLAN ID, trunk mode, and access mode.

 Ø Supports port isolation.

 Ø Supports TC10 sleep and wake-up

 Ø support wiring harness diagnostics

 Ø Support PMA testing

 Ø The Ethernet port in the vehicle can be configured as either a Master or a Slave.

 Ø Supports auto mode, automatically matching the master/slave mode and communication rate (100/1000Mbps) of the user's in-Automotive Ethernet device, plug-and-play without configuration.

Ø Supports single-channel polling testing, resolving the issue where multiple identical IP devices on the production line cannot be tested simultaneously.

 Ø Built-in 100/1000BASE-T1 filters compliant with OPEN Aliances standards.

 Ø Supports web page configuration of device parameters


3、Product Specification

Working voltage

DC9~36V, reverse polarity protection

Power Consumption

Less than 8W

EMC levels of protection

IEC 61000-4-5 Surge: Power supply: ±1 kV ; Signal: ±1 kV

IEC 61000-4-2 ESD: Contact: ±8 kV ; Air: ±15 kV

IEC 61000-4-4 EFT power supply: ±1 kV; signal:±1kV

Working temperature

-40°C~+85°C

Working humidity

5%~95% no condensation

 Ingress protection (IP) rating

IP40

For models with IP67 rating, please contact customer service

Corrosion resistance

48-hour salt spray test

Shock test of outer shell

Test standard: GB4943.1-2022

Steel ball with 50mm diameter, 1300mm impact height, no danger generated

Vibration test

The vibration test standard is ISO 16750-3:2023


4、Hardware Interface


Table 1.1 Interface Description

Item No.

Interface

Description

①

Power terminal, DC9~36V power supply, anti-reverse connection

Three types of power supply terminals:

5.5*2.1 DC round terminals

5.08mm spacing green terminal with fixing screw, shock-resistant;

The 5557 has two pins designated as power supply pins.

②

DI/DO interface

5557 Pin Configuration: 1 digital input (DI) port, 1 digital output (DO) port, powered by external power supply. Detailed pin definitions are specified in Section 1.2.8.

③

Mirror monitoring mode switch

Set the mirror monitoring mode, CH11 will serve as the mirror monitoring port.

④

Auto mode switch

To turn on the auto mode or turn off the auto mode

⑤

Network port (CH10)

The standard RJ45 Ethernet port (100BASE-Tx/1000BASE-T) features two LED indicators, with their meanings detailed in Section 1.2.10.

⑥

Network port (CH11)

The standard RJ45 Ethernet port (100BASE-Tx/1000BASE-T) features two indicator LEDs, with their meanings detailed in Section 1.2.10.

⑦

10G SFP+ port (CH11)

Standard SFP+ interface, supporting external 10G SFP+ port modules (10G Ethernet port module is not included by default; contact customer service for assistance)

⑧

RS485

1 channel of RS485 interface

⑨

2 CANFD

2 CANFD interfaces, compatible with CAN

⑩

100 Mbps network port

A 100 Mbps network port allows you to configure device parameters via a web page.

⑪

6 Gigabit Automotive Ethernet T1

6-port Gigabit/100Mbps automotive Ethernet (100/1000BASE-T1) with interface options: H-MTD, T-Net, ECT (electrical connector), Amphenol connector, and optional 3.81OPEN terminal

⑫

3Channels of 100Mbps Automotive Ethernet T1

3-channel 100Mbps automotive Ethernet (100BASE-T1) with optional interfaces: H-MTD, T-Net, ECT (electrical connection port), Amphenol connector, and 3.81OPEN terminal

⑬

Status indicator

Displays status indicators such as operational status, rate, master-slave, and link status


5、Mechanical Diagram

260.4* 167.3 * 37 mm


6、Ordering Information

Model P/N

Description

XQ92111-H

2*100/1000M RJ45 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, terminal block

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-T

2*100/1000M RJ45 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, TEmatenet interface

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-L

2*100/1000M RJ45 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, Rosenberg H-MTD

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-ECT

2*100/1000M RJ45 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, ECT interface

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-H-M12

2*100/1000M M12 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, terminal block

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-T-M12

2*100/1000M M12 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, TEmatenet interface

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-L-M12

2*100/1000M M12 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, Rosenberg H-MTD

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting

XQ92111-ECT-M12

2*100/1000M M12 copper ports

1*10G SFP slot,

6*100/1000M T1 ports, 3*100M T1 port, ECT interface

Operating temp.: -40~+85°C

Power supply: DC9~36V

Installation: Wall-mounting























































Previous:XQ1001U-T1:Automotive Ethernet 100Base-T1 Media Converter
Next:XQ1102: Automotive Ethernet 1000Base-T1 Converter
Copyright 2026 Shenzhen Xallcom Technology Co., Ltd. All Rights Reserved.
Add: 3/F, No.220-1 of Niucheng Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China
Tel: +86-755-8605 9338  Fax: +86-755-8605 9328
E-mail: info@xallcom.com
Design By:www.66168.net