XS1802-Q：8-port guide rail industrial serial device server

Product Description:
The ZQWL-EthRS-F8D serial server independently developed by Intelligent Embedded IoT has 1 network port and 8 RS485 interfaces. Built in electrical isolation module to achieve The signal and power are fully isolated, enhancing the anti-interference performance of the equipment. The CPU adopts ARM9 core processor,  Linux system, and TCP/IP ntegrated internally .The protocol stack can achieve bidirectional transparent transmission of data from serial port to Ethernet port, ModBus protocol conversion, and other functions. The device can be easily configured with a simple setup Implement networking and cloud migration functions for serial devices. Widely used in computer room monitoring, smart agriculture, environmental monitoring, intelligent transportation, barrier control, and intelligent express delivery Cabinet and other industries.
Specification parameters:
Network interface  Ethernet interface: RJ45
Electrical isolation: 1.5KV electromagnetic isolation
Data rate: 10/100M adaptive, MDI/MDIX cross direct connection  Automatic switching
Supported protocols: Ethernet, TCP, UDP, IP, ARP, DHCP DNS、ICMP
Serial port ：
Number of ports: 8 RS485 ports, 8 independent serial ports
Interface form: RS-485 is a 2-pin Phoenix terminal (A, B)
Electrical isolation: 5KV photoelectric isolation (full isolation of power and signal)
Baud rate: 600~460800bps
Check bits: NONE, EVENT, ODD, Space, Mark
Data bits: 5, 6, 7, 8
Stop position: 1, 1.5, 2
Working mode
Each serial port supports TCP_SRVER, TCP_CIENT
UDP_SERVER, UDP_CLIENT four working modes
Smart Embedded Cloud/Alibaba Cloud
Support access to intelligent embedded IoT cloud and Alibaba Cloud
MQTT protocol
Supports standard MQTT protocol, SSL encrypted transmission (currently not supported)
Certification)
ModBus gateway
ModBus TCP to RTU function: Supports
ModBus instruction memory function: supports
Parameter configuration method
Support browser web page configuration and upper computer software configuration
Featured Features
Supports relay function between 8 serial ports
All 8 serial ports support independent modification of baud rate function
Virtual Serial Port: Provides virtual serial port software
Registration package: Each serial port can set the sending method and data of the registration package
Heartbeat packet: Each serial port can set heartbeat packet data and heartbeat packet time
software kit
Provide virtual serial port software and parameter configuration software
CPU
Core: ARM9
System: Linux system
power supply
Interface form: 2pin Phoenix terminal
Supply voltage: DC9~36V, anti reverse connection
Maximum power consumption: 180mA@12V
pilot lamp
Power light (PWR): red light, always on
RUN light: green light, flashing (1Hz)
PORT: Green light, flashing or constantly on when there is data on the serial port
Internet port light: yellow light is always on, green light is flashing
key
Short press to reset the device; Press and hold for at least 5 seconds to restore the device to its original factory state
EMC protection
IEC 61000-4-5 Surge: Power supply: ± 2KV; Signal: ± 2KV
IEC 61000-4-2 ESD: Contact: ± 8KV; Air: 15KV
IEC 61000-4-2 EFT: Power supply: ± 4 KV; Signal: ± 2KV
work environment
Working temperature: -40~85 ℃ (industrial grade)
Storage temperature: -45~85 ℃
Working environment humidity: 5%~95% RH (no condensation)
Installation method
Support rail installation
weight ：About 470g
size ：172 * 115 * 41mm (length * width * height)
Default parameters of the device
IP address: 192.168.1.253
Serial port parameters: 9600bps, 8-bit, NONE, 1-bit
Serial port local port number: PORT1-8 port numbers are 1030~1037 respectively
Working mode: TCP_SRVER

Previous：XSC08-4-Q：8 Channel Analog RS485 Acquisition

Next：XS3802J-Q Serial Server